Measurement principle: non-contact ultrasonic flow measurement system

Main features: Suitable for volume flow measurement of chemical reagents, solvents, liquid hydrocarbons and acid-base liquids

Nominal caliber: DN 15... 4'000 1/2"... 160 "

Scope of measurement: 0. 452'389 m3/h

Process Temperature: Standard: - 40... + 80 degree C (- 40 _ 176 degrees F) Optional: 0.. + 170 degrees C (+32... 338 degrees F)

Pressure range: no pressure limit

Measurement error: +2%

Communication: HART PROFIBUS DP/PA Foundation Fieldbus (FF)

Output signal: 0/4... 20 mA Current Output Pulse/Frequency Output Relay Output

Input signal: state input

Explosion-proof certification: ATEX FM CSA IECEx NEPSI

Protection Level: IP 6E NEMA 6P

Display/Operation: Four-Line LCD Backlight Display Touch Key Operation

Advantages: Non-contact measurement method, especially for flow measurement of corrosive fluid, dangerous fluid or ultra-pure fluid medium. It can be used for bidirectional measurement of metal and plastic pipes and composite pipes with or without lining. No pressure loss is installed outside the pipes without interruption of process technology.